Ningbo Euro Mould & Plastic Co., Ltd

NIngbo Euro Mould & Plastic Co.,Ltd is a professional manufacturer devoted to plastic tools (moulds) with high precision,Website:http://www.europlasmould.com, tight tolerance, at reasonable price and timely delivery, serving a wide variety of industries, including but not limited to, food packaging, beverage, home appliance, plastic toys, automotive parts, electrical appliances, etc.

Business Type

Manufacturer

Website

www.europlasmould.com

Number of employees

1,000 - 2,000

Anual sales

100,000,000 - 200,000,000 UDS

Import volume

100,000,000 - 200,000,000 USD

Export volume

100,000,000 - 200,000,000 USD

Legal representative

for premium members only

Business addresss

No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China

Beach Chair Mould
Product Name

Beach Chair Mould

Description

1.Product name: Beach Chair Mould2.Part material: PP3.Mould cavity: single cavity?4.Mould base: S50C,Website:http://www.europlasmould.com, P20, LKM / DME standard?5.Core & cavity: P20, interchangeable backseat available ?6.Runner: cold runner or hot tip from DME, YUDO or as per client?? request7.Mould finish: polish and logo engraved8.Mould life: 500k ~ 800k shots9.Optimal design with max. cooling water up to the chair surface10.Wear plates applied for longer mould life11.Samples and videos for mould trials available for clients to check12.T1 time: 45- 50 workings after confirmation on the mould drawings?13.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system,

Model name

model

PC Chair Mould PC
Product Name

PC Chair Mould PC

Description

1.Product name: PC Chair Mould2.Part material: PC3.Mould cavity: single cavity?4.Mould base: S50C,Website:http://www.europlasmould.com, P20, LKM / DME standard?5.Core & cavity: P206.Runner: hot tip from DME, YUDO or as per client?? request7.Mould finish: polish and logo engraved8.Mould life: 500k ~ 800k shots9.Optimal design with max. cooling water up to the chair surface10.Wear plates applied for longer mould life11.Samples and videos for mould trials available for clients to check12.T1 time: 45- 50 workings after confirmation on the mould drawings?13.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and ejection of the products.As lon

Model name

model

Rattan Chair Mould
Product Name

Rattan Chair Mould

Description

1.Product name: Rattan Chair Mould2.Part material: PP3.Mould cavity: single cavity?4.Mould base: S50C,Website:http://www.europlasmould.com, P20, LKM / DME standard?5.Core & cavity: P20, interchangeable backseat available ?6.Runner: cold runner or hot tip from DME, YUDO or as per client?? request7.Mould finish: polish and logo engraved8.Mould life: 500k ~ 800k shots9.Optimal design with max. cooling water up to the chair surface10.Wear plates applied for longer mould life11.Samples and videos for mould trials available for clients to check12.T1 time: 45- 50 workings after confirmation on the mould drawings?13.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system,

Model name

model

Armed Chair Mould
Product Name

Armed Chair Mould

Description

1.Product name: Armed Chair Mould2.Part material: PP3.Mould cavity: single cavity?4.Mould base: S50C,Website:http://www.europlasmould.com, P20, LKM / DME standard?5.Core & cavity: P206.Runner: cold runner or hot tip from DME, YUDO or as per client?? request7.Mould finish: polish and logo engraved8.Mould life: 500k ~ 800k shots9.Optimal design with max. cooling water up to the chair surface10.Wear plates applied for longer mould life11.Samples and videos for mould trials available for clients to check12.T1 time: 35- 45 workings after confirmation on the mould drawings?13.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and ejection of t

Model name

model

Disposable Food Container Mould
Product Name

Disposable Food Container Mould

Description

1.Product name: Disposible Food Container Mould2.Part material: PP3.Mould cavity: single cavity ~ 4cavity4.Mould base: P20,Website:http://www.europlasmould.com, S1365.Core & cavity: S136?6.Runner: hot runner from DME, YUDO or as per client?? request7.Mould finish: mirror polish and logo engraved8.Mould life: 3million ~ 5 million shots9.Cycle time: 5-8sec/shot10.IML applicable?11.Optimal design with max. cooling water up to the product surface12.Independent core & cavity for easier maintenance?13.Wear plates applied for longer mould life14.Parting line is well protected, and with high speed CNC machining to achieve precision 0.02mm15.Samples and videos for mould trials available for clients to check16.T1 time: 45- 50 workings after confirmation on the mould drawings?17.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, e

Model name

model

Thin Wall Food Tub Mould
Product Name

Thin Wall Food Tub Mould

Description

1.Product name: Thin Wall Food Tub Mould2.Part material: PP3.Mould cavity: single cavity ~ 4cavity4.Mould base: P20,Website:http://www.europlasmould.com, S1365.Core & cavity: S136?6.Runner: hot runner from DME, YUDO or as per client?? request7.Mould finish: mirror polish and logo engraved8.Mould life: 3million ~ 5 million shots9.Cycle time: 5-8sec/shot10.IML applicable?11.Optimal design with max. cooling water up to the product surface12.Independent core & cavity for easier maintenance?13.Wear plates applied for longer mould life14.Parting line is well protected, and with high speed CNC machining to achieve precision 0.02mm15.Samples and videos for mould trials available for clients to check16.T1 time: 45- 50 workings after confirmation on the mould drawings?17.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except g

Model name

model

Unscrewing Cap Mould
Product Name

Unscrewing Cap Mould

Description

1.Product name: Unscrewing Cap Mould2.Part material: PP3.Product dimension: dia. 110-170mm4.Mould cavity: single cavity ~ multi-cavity5.Mould base: S50C,Website:http://www.europlasmould.com, P20, LKM, DME standard6.Mould core & cavity: S136, 23167.Hot runner: DME, YUDO, Mold Master, or as per client?? request.8.Hydraulic motor for ejection9.Mould finish: mirror polish, texture, logo engrave10.Cycle time: 15sec ~ 20sec/ shot, depending on product structure.11.Mould life: 3million ~ 5million shots12.Samples and videos for mould trials available for clients to check13.T1 time: 40-45 workings after confirmation on the mould drawings?14.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most

Model name

model

Edible Oil Cap Mould
Product Name

Edible Oil Cap Mould

Description

1.Product name: Edible Oil Cap Mould2.Part material: PP/PE3.Mould cavity: multi-cavity4.Mould base: S50C,Website:http://www.europlasmould.com, P20, LKM, DME standard5.Mould core & cavity: S136, 23166.Hot runner: DME, YUDO, Mold Master, or as per client?? request.7.Mould finish: mirror polish, texture8.Cycle time: 12sec ~ 20sec/ shot, depending on product structure.9.Mould life: 3million ~ 5million shots10.Samples and videos for mould trials available for clients to check11.T1 time: 45-50 workings after confirmation on the mould drawings?12.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and ejection of the products.As long as the mold

Model name

model

Snap On Cap Mould
Product Name

Snap On Cap Mould

Description

1.Product name ?Snap On Cap Mould2.Part material: PP/PE3.Mould cavity: multi-cavity4.Mould base: S50C,Website:http://www.europlasmould.com, P20, LKM, DME standard5.Mould core & cavity: S136, 23166.Hot runner: DME, YUDO, Mold Master, or as per client?? request.7.Mould finish: mirror polish, texture8.Cycle time: 12sec ~ 20sec/ shot, depending on product structure.9.Mould life: 3million ~ 5million shots10.Samples and videos for mould trials available for clients to check11.T1 time: 45-50 workings after confirmation on the mould drawings?12.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and ejection of the products.As long as the mold ca

Model name

model

Flip Top Cap Mould
Product Name

Flip Top Cap Mould

Description

1.Product name: Flip Top Cap Mould2.Part material: PP,Website:http://www.europlasmould.com, designed for lotion bottles or sauce bottles, etc3.Mould cavity: 4cav to multi-cavity4.Mould base: S50C, P20, LKM, DME standard5.Mould core & cavity: S1366.Hot runner: DME, YUDO, Mold Master, or as per client?? request.7.Mould finish: mirror polish, texture8.Cycle time: 15sec ~ 20sec/ shot, depending on product structure.9.Mould life: 2million ~ 3million shots10.Samples and videos for mould trials available for clients to check11.T1 time: 45-50 workings after confirmation on the mould drawings?12.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling,

Model name

model

Sports Cap Mould
Product Name

Sports Cap Mould

Description

1.Product name: Sports Cap Mould2.Part material: PE3.Mould cavity: multi-cavity4.Mould base: S50C,Website:http://www.europlasmould.com, P20,?5.Mould core & cavity: 2316, S1366.Slider: SKD 61, 2316, S1367.Hot runner: DME, YUDO, Mold Master, or as per client?? request.8.Cold runner also available for low cavity no.9.Mould finish: mirror polish10.Cycle time: 12sec ~ 20sec/ shot, depending on product structure.11.Mould life: 3million ~ 5million shots12.Samples and videos for mould trials available for clients to check13.T1 time: 40-45 workings after confirmation on the mould drawings?14.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and

Model name

model

Child Resistant Cap Mould
Product Name

Child Resistant Cap Mould

Description

1.Product Name: Child Resistant Cap Mould2.Part material: PE3.Mould cavity: multi-cavity4.Mould base: S50C,Website:http://www.europlasmould.com, P20,?5.Mould core & cavity: 2316, S1366.Slider: SKD 61, 2316, S1367.Hot runner: DME, YUDO, Mold Master, or as per client?? request.8.Cold runner also available for low cavity no.9.Mould finish: mirror polish10.Cycle time: 12sec ~ 20sec/ shot, depending on product structure.11.Mould life: 3million ~ 5million shots12.Samples and videos for mould trials available for clients to check13.T1 time: 40-45 workings after confirmation on the mould drawings?14.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cool

Model name

model

Tamper Evident Cap Mould
Product Name

Tamper Evident Cap Mould

Description

1.Product name: Tamper Evident Cap Mould2.Part material: PP,Website:http://www.europlasmould.com, PE3.Mould cavity: single cavity to multi-cavity4.Mould base: S50C, P20,?5.Mould core & cavity: 2316, S1366.Slider: SKD 61, 2316, S1367.Hot runner: DME, YUDO, Mold Master, or as per client?? request.8.Cold runner also available for low cavity no.9.Mould finish: mirror polish10.Cycle time: 12sec ~ 20sec/ shot, depending on product structure.11.Mould life: 3million ~ 5million shots12.Samples and videos for mould trials available for clients to check13.T1 time: 40-45 workings after confirmation on the mould drawings?14.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner syst

Model name

model

Detergent Bottle Mould
Product Name

Detergent Bottle Mould

Description

1.Product material: HPPE2.Mould cavity: single cavity to multi-cavity3.Mould material: S50C,Website:http://www.europlasmould.com, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S1364.Deflasher / dummy mould: as optional5.Mould finish: polish and sandblasted6.Samples and videos for mould trials available for clients to check7.Delivery time: 30- 40 workings after confirmation on the mould drawings?8.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clients9.We can design the moulds according to client?? machine specification.Why Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and ejection of the products.As long as the mold can produce the desired product, even only for a shor

Model name

model

Cosmetic Bottle Mould
Product Name

Cosmetic Bottle Mould

Description

1.Product material: PP,Website:http://www.europlasmould.com, HPPE, LDPE, etc 2.Mould cavity: single cavity to multi-cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S136 4.Deflasher / dummy mould: as optional 5.Mould finish: polish and sandblasted 6.Samples and videos for mould trials available for clients to check 7.Delivery time: 30- 40 workings after confirmation on the mould drawings? 8.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clients 9.We can design the moulds according to client?? machine specification. Why Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious. Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start wit

Model name

model

Ponton Blow Mould
Product Name

Ponton Blow Mould

Description

1.Product material: HPPE,Website:http://www.europlasmould.com,2.Mould cavity: single cavity?3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts, S136, suggest making the pontoon mould with AL or AL7075 for better cooling to shorten the cycle time.4.Deflasher / dummy mould: not available?5.Mould finish: polish and sandblasted6.Samples and videos for mould trials available for clients to check7.Delivery time: 30- 40 workings after confirmation on the mould drawings?8.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clients9.We can design the moulds according to client?? machine specification.Why Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and ejection of the products.As lon

Model name

model

Jerrycan Blow Mould
Product Name

Jerrycan Blow Mould

Description

1.Product material: HPPE,Website:http://www.europlasmould.com, LDPE, etc2.Mould cavity: single cavity to multi-cavity3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck, handle and bottom,, S1364.Deflasher / dummy mould: as optional5.Mould finish: polish and sandblasted6.Delivery time: 30- 40 workings after confirmation on the mould drawings?7.We can design the moulds according to client?? machine specification.Why Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and ejection of the products.As long as the mold can produce the desired product, even only for a short time, it is considered acceptable.3.Mold steel selection Mold steel selection is appropriate for the expected life and performance of the mold and

Model name

model

Juice Bottle Mould
Product Name

Juice Bottle Mould

Description

1.Product material: PP,Website:http://www.europlasmould.com, PE2.Mould cavity: single cavity to multi-cavity3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S1364.Deflasher / dummy mould: as optional5.Mould finish: polish and sandblasted6.Samples and videos for mould trials available for clients to check7.Delivery time: 30- 40 workings after confirmation on the mould drawings?8.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clients9.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWe can design the moulds according to client?? machine specification, we??e ever made molds for Bekum 7cav machine, Uniloy machine, Rotary Blow Molder.Why Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thoug

Model name

model

Sport Bottle Mould
Product Name

Sport Bottle Mould

Description

1.Product material: PP,Website:http://www.europlasmould.com, PE2.Mould cavity: single cavity to multi-cavity3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S1364.Deflasher / dummy mould: as optional5.Mould finish: polish and sandblasted6.Samples and videos for mould trials available for clients to check7.Delivery time: 30- 40 workings after confirmation on the mould drawings?8.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clients9.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWe can design the moulds according to client?? machine specification, we??e ever made molds for Bekum 7cav machine, Uniloy machine, Rotary Blow MolderWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much though

Model name

model

Milk Bottle Mould
Product Name

Milk Bottle Mould

Description

1.Product material: PP,Website:http://www.europlasmould.com, HDPE, LDPE, etc2.Mould cavity: single cavity to multi-cavity3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S1364.Deflasher / dummy mould: as optional5.Mould finish: polish and sandblasted6.Samples and videos for mould trials available for clients to check7.Delivery time: 30- 40 workings after confirmation on the mould drawings?8.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clients9.We can design the moulds according to client?? machine specification, we??e ever made molds for Bekum 7cav machine, Uniloy machine, Rotary Blow Molder, etc.Why Choose US?Not all mold manufacturers are alike Euro Mould who takes priority in mold quality.A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.SubjectMold (A)- Euro MouldMold (B)1.Concept & DesignConceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner SystemsMuch thought is given to decide on the most suitable runner system, the gating, cooling, and eje

Model name

model

Drum Blow Mould
Product Name

Drum Blow Mould

Description

1.Product material: HDPE2.Mould cavity: single cavity?3.Mould material: S50C,Website:http://www.europlasmould.com, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S1364.Deflasher / dummy mould: not available5.Mould finish: polish and sandblasted6.Samples and videos for mould trials available for clients to check7.Delivery time: 30- 40 workings after confirmation on the mould drawings?8.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clients9.We can design the moulds according to client?? machine specification.Why Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. ?Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and ejection of the products.As long as the mold can produce the desired product, even only for a short time, it is

Model name

model

Website

www.europlasmould.com

Contact person

Allison Qian

Phone

86-0574-65325867

Address

No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China

City

ningbo

Region

Zhejiang

Postal code

315600